xA L4-1.5L (1NZ-FE) (2006)
Standard belt deflection
Standard belt deflection
NOTICE:
^
Check the drive belt deflection at the specified point.
^
When installing a new belt, set its tension value as specified.
^
When inspecting a belt which has been used over 5 minutes, apply the specification of "Used Belt".
^
When reinstalling a belt which has been used over 5 minutes, adjust its deflection and tension to the intermediate value of each
specification of "Used Belt".
^
Belt tension and deflection should be checked after 2 revolutions of engine cranking.
^
When using a belt tension gauge, confirm the accuracy by using a master gauge first.