xA L4-1.5L (1NZ-FE) (2006)
3. DTC, BUS CHECK COMBINATION TABLE
a. Perform troubleshooting according to the combination of DTCs that are output.
HINT:
-
ECM COMMUNICATION STOP MODE.
-
SKID CONTROL ECU COMMUNICATION STOP MODE.
-
STEERING SENSOR COMMUNICATION STOP MODE.
-
YAW RATE SENSOR COMMUNICATION STOP MODE.
-
A/C AMPLIFIER COMMUNICATION STOP MODE.
Fail-Safe Chart
FAIL-SAFE CHART
1. FAIL-SAFE FUNCTION
a. When communication fails in any of the CAN bus lines (communication lines) due to a short circuit or for another reason, the fail-safe
function, which is specified for each system, operates to prevent the system from malfunctioning.