xA L4-1.5L (1NZ-FE) (2006)
b. Install the sensor.
Torque: 20 N.m (204 kgf.cm, 15 ft.lbf)
c. Connect the sensor connector.
2. CONNECT ENGINE WIRE
a. Connect the 2 clamps of the engine wire.
3. INSTALL AIR CLEANER ASSEMBLY
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
5. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.