xA L4-1.5L (1NZ-FE) (2006)
Fuel Injector: Testing and Inspection
INSPECTION
1. INSPECT FUEL INJECTOR ASSEMBLY
a. Inspect the resistance.
1. Measure the resistance between the terminals.
Standard resistance:
13.5 to 14.2 Ohms at 21 degrees C (70 degrees F)
If the result is not as specified, replace the injector assembly.
b. Inspect the injector operation.
CAUTION:
-
Perform the test in a well-ventilated area and be careful of flames.
-
Carefully handle the fuel tube connector.
1. Prepare a fuel tube connector.
HINT: Part No. 23901-21060
2. Connect SST and the fuel tube connector to the fuel pipe.
SST 09268-41047 (95336-08070)
CAUTION: After following the precautions of the FUEL SYSTEM, connect the fuel tube connector (quick type).