xA L4-1.5L (1NZ-FE) (2006)
/Page-794003.png)
1.
Check for the Authorized Modifications Label affixed to the vehicle in the locations shown in Figures 1 and 2. Confirm if the ECM (PCM)
calibration has been updated. If the calibration listed is NOT the latest ECM (PCM) calibration go to step 2.
2.
Flash reprogram the ECM/PCM.
^
The GR8 Battery charger MUST be used in Power Supply Mode to maintain battery voltage at 13.5 volts while flash reprogramming the
vehicle.
