xA L4-1.5L (1NZ-FE) (2006)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor (For Bank 1 Sensor 2)
REMOVAL
1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt
pretensioner activation.
2. REMOVE SHIFT LEVER KNOB (for Manual Transaxle)
3. REMOVE REAR CONSOLE BOX
4. REMOVE HEATED OXYGEN SENSOR
a. Disconnect the sensor connector.
b. Using SST, remove the sensor.
SST 09224-00010
INSTALLATION
1. INSTALL HEATED OXYGEN SENSOR
a. Using SST, install the sensor.