xA L4-1.5L (1NZ-FE) (2006)
NOTICE: Tighten each bolt uniformly, keeping the camshaft level.
z) Install the No. 1 bearing cap.
Torque: 23 Nm (235 kgf-cm, 17 ft. lbs.)
aa) Using SST, hold the camshaft with a wrench on the hexagon lobe, and install the bolt.
SST 09023-38400
Torque: 64 Nm (653 kgf-cm, 47 ft. lbs.)
ab) Remove the bar from the timing chain tensioner.
ac) Turn the crankshaft pulley until its timing notch and the timing mark 0 of the chain cover are aligned.
ad) Check that all the pairs of the timing marks are aligned.
ae) Apply seal packing to 2 or 3 threads of the screw plug end.
Seal packing: Part No. 08833-00070 or equivalent
af)
Using an 8 mm hexagon wrench, install the screw plug.
Torque: 15 Nm (153 kgf-cm, 11 ft. lbs.)