xA L4-1.5L (1NZ-FE) (2006)
/Page-1195007.png)
d. Install SST.
1. Connect the SST connector to the airbag.
SST 09082-00780
e. Place the tires.
1. Place at least 2 tires under the tire to which the airbag is tied.
2. Place at least 2 tires on top of the tire to which the airbag is tied. The top tire should have a disc wheel installed.
NOTE:
-
Do not place the SST connector under the tire as the connector may be damaged.
-
Use a disc wheel that you are planning to throw away, as the airbag deployment will damage the disc wheel.
-
Use tires that you are planning to throw away, as the airbag deployment may damage the tires.
3. Tie the tires together with 2 wire harnesses.
CAUTION: Make sure that the wire harnesses are tight. If there is slack in a wire harness, the tires may come loose when the airbag is
deployed.
