xA L4-1.5L (1NZ-FE) (2006)
Repairs and Inspections Required After a Collision: Service and Repair
Component Inspections
Center Airbag Sensor Assembly
CENTER AIRBAG SENSOR ASSEMBLY
ON-VEHICLE INSPECTION
1. CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
a. Perform a diagnostic system check.
2. CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
a. Perform a diagnostic system check.
3. CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG DEPLOYED)
a. Replace the center airbag sensor.
CAUTION: For removal and installation of the center airbag sensor assembly, be sure to follow the correct procedures.
Curtain Shield Airbag
CURTAIN SHIELD AIRBAG ASSEMBLY
ON-VEHICLE INSPECTION
1. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
a. Perform a diagnostic system check.
b. With the curtain shield airbag installed on the vehicle, perform a visual check.
If there are any defects as mentioned , replace the front pillar garnish or roof headlining with a new one:
Cuts, minute cracks or marked discoloration on the front pillar garnish or roof headlining around the curtain shield airbag.
CAUTION: For removal and installation procedures of the curtain shield airbag assembly, be sure to follow the correct procedures.
2. CHECK CURTAIN SHIELD AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG NOT DEPLOYED)
a. Perform a diagnostic system check.