xA L4-1.5L (1NZ-FE) (2006)
CAUTION:
-
Never dispose of a front seat outer belt that has a non-activated pretensioner.
-
The seat belt pretensioner produces a loud, exploding sound when it activates. Perform the operation where it will not be a nuisance to nearby
people.
-
When activating a front seat outer belt (with seat belt pretensioner), stand at least 10 m (33 ft.) away from the front seat outer belt.
-
Use gloves and safety glasses when handling a front seat outer belt with an activated pretensioner.
-
Always wash your hands with water after completing the disposal.
-
Do not apply water to a front seat outer belt that has an activated pretensioner.
-
Perform procedures in a place away from electrical interference.
-
When activating the seat belt pretensioner, always use the specified SST (SRS airbag deployment tool).
1. DISPOSE OF FRONT SEAT OUTER BELT ASSEMBLY (WHEN INSTALLED IN VEHICLE)
HINT: Prepare a battery to activate the seat belt pretensioner.
a. Check if SST is functioning properly.
SST 09082-00700
NOTE: When activating the seat belt pretensioner, always use the specified SST.
1. Connect the SST's red clip to the battery's positive (+) terminal and the black clip to the battery's negative (-) terminal.
HINT: Do not connect the yellow connector. The yellow connector is used to connect to the seat belt pretensioner.