xA L4-1.5L (1NZ-FE) (2006)
5. CONNECT SKID CONTROL SENSOR WIRE
a. Connect the connector to the skid control sensor.
6. INSTALL REAR WHEEL
Torque: 103 N.m (1,050 kgf.cm, 76 ft.lbf)
7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
8. PERFORM INITIALIZATION
a. Perform initialization.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
9. CHECK ABS SPEED SENSOR SIGNAL
a. Check the ABS speed sensor signal.