xA L4-1.5L (1NZ-FE) (2006)
a. Remove the 4 bolts and 2 reinforcements.
b. Remove the bolt and 2 nuts, and disconnect the engine mounting insulator rear.
c. Using a transmission jack, support the crossmember.
d. Remove the 4 bolts and crossmember.
24. REMOVE POWER STEERING RACK HOUSING HEAT INSULATOR
a. Remove the 2 bolts and heat insulator.
25. REMOVE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY
26. REMOVE STEERING INTERMEDIATE SHAFT
a. Put matchmarks on the steering link and intermediate shaft.
b. Remove the bolt and intermediate shaft.
27. REMOVE POWER STEERING LINK ASSEMBLY
a. Put matchmarks on the steering link and No. 2 bracket.