xA L4-1.5L (1NZ-FE) (2006)
4. INSTALL POWER STEERING RACK HOUSING HEAT INSULATOR
a. Install the heat insulator with the bolt as shown in the illustration.
Torque: 18 Nm (178 kgf-cm, 13 ft. lbs.)
b. Install the bolt to the heat insulator.
Torque: 35 Nm (360 kgf-cm, 26 ft. lbs.)
5. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY
a. Using a transmission jack, support the crossmember.
b. Using SST, align the holes of the crossmember.
SST 09670-00010
HINT: Use the same procedures described for the other side.
c. Install the crossmember with the 4 bolts.
Torque:
116 Nm (1,183 kgf-cm, 86 ft. lbs.) for bolt A
Torque: 70 Nm (714 kgf-cm, 52 ft. lbs.) for bolt B
d. Install the crossmember with the bolt and 2 nuts.
Torque: 72 Nm (734 kgf-cm, 53 ft. lbs.)