xA L4-1.5L (1NZ-FE) (2006)
b. Using SST, install the axle carrier bush to the axle beam.
SST 09710-14013 (09710-00021), 09950-40011 (09951-04010, 09952-04010, 09953-04030, 09954-04020, 09955-04031, 09957-04010,
09958-04011), 09950-60010 (09951-00560)
NOTICE:
^
Hang the claw of SST to the bush securely.
^
Do not scratch the rubber portion of the bush.
^
Do not deform the bush rib.
2. INSTALL REAR AXLE CARRIER BUSH RH
HINT: Use the same procedures described for the LH side.
INSTALLATION
1. TEMPORARILY INSTALL REAR AXLE BEAM ASSEMBLY
a. Support the axle beam with a jack.
b. Install the axle beam, and temporarily install the 2 bolts.
2. INSTALL REAR COIL SPRING LH
3. INSTALL REAR COIL SPRING RH
HINT: Use the same procedure described for the LH side.
4. TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY LH
5. TEMPORARILY INSTALL REAR SHOCK ABSORBER ASSEMBLY RH