xA L4-1.5L (1NZ-FE) (2006)
/Page-1098002.png)
4. REMOVE FRONT AXLE HUB BOLT
a. Using SST and a screwdriver or an equivalent to hold the axle hub, remove the hub bolt.
SST 09628-10011
5. INSTALL FRONT AXLE HUB BOLT
a. Install the washer and nut to a new hub bolt as shown in the illustration.
b. Using a screwdriver or an equivalent to hold the axle hub, install the hub bolt by tightening the nut.
6. INSTALL FRONT DISC
7. CONNECT FRONT DISC BRAKE CYLINDER ASSEMBLY
a. Connect the front disc brake cylinder assembly.
8. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
