xA L4-1.5L (1NZ-FE) (2006)
1. INSTALL TRANSMISSION REVOLUTION SENSOR
a. Coat a new O-ring with ATF.
b. Install the O-ring to the transmission revolution sensor.
c. Install the sensor with the bolt.
Torque: 5.4 Nm (55 kgf-cm, 48 inch lbs.)
d. Connect the connector.
2. INSTALL AIR CLEANER BRACKET
a. Install the air cleaner bracket with the 2 bolts.
Torque: 19 Nm (195 kgf-cm, 14 ft. lbs.)
b. Connect the wire harness clamp to the air cleaner bracket.
3. INSTALL AIR CLEANER ASSEMBLY
a. Install the air cleaner.