xA L4-1.5L (1NZ-FE) (2006)
2. REMOVE AIR CLEANER BRACKET
a. Disconnect the wire harness clamp.
b. Remove the 2 bolts and air cleaner bracket.
3. REMOVE TRANSMISSION REVOLUTION SENSOR
a. Disconnect the connector.
b. Remove the bolt and transmission revolution sensor.
c. Remove the O-ring from the sensor.
INSPECTION
1. INSPECT TRANSMISSION REVOLUTION SENSOR
a. Measure the resistance of the sensor.
Standard resistance
Standard resistance
If the result is not as specified, replace the sensor.
INSTALLATION