xA L4-1.5L (1NZ-FE) (2006)
/Page-840002.png)
2. DISCONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS
a. Remove the clip and hole pin and disconnect the push rod clevis from the clutch pedal.
3. REMOVE CLUTCH PEDAL SUPPORT SUBASSEMBLY
a. Remove the 2 nuts, bolt and support.
DISASSEMBLY
1. REMOVE CLUTCH PEDAL SUB-ASSEMBLY
a. Remove the bolt and nut.
b. Remove the pedal from the clutch pedal support.
2. REMOVE CLUTCH PEDAL STOPPER BOLT
a. Loosen the lock nut and remove the bolt.
b. Remove the lock nut from the bolt.
3. REMOVE CLUTCH PEDAL PAD
