xA L4-1.5L (1NZ-FE) (2006)
Torque: 12 Nm (120 kgf-cm, 9 ft. lbs.)
2. CONNECT CLUTCH MASTER CYLINDER PUSH ROD CLEVIS
a. Apply MP grease to the contact surface of the pin and clevis bush.
b. Connect the clevis to the clutch pedal with the pin and clip.
HINT: Install the pin from the left side of the vehicle.
3. INSTALL CLUTCH PEDAL SPRING
4. INSPECT AND ADJUST CLUTCH PEDAL SUBASSEMBLY
a. Inspect and adjust the clutch pedal.