xA L4-1.5L (1NZ-FE) (2006)
/Page-847015.png)
Torque: 216 Nm (2,200 kgf-cm, 159 ft. lbs.)
b. Using a chisel and hammer, stake the hub nut.
9. INSTALL ENGINE UNDER COVER LH
10. INSTALL FRONT WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
11. ADD MANUAL TRANSAXLE OIL (for Manual Transaxle)
12. INSPECT AND ADJUST MANUAL TRANSAXLE OIL LEVEL (for Manual Transaxle)
a. Inspect and adjust the manual transaxle oil level.
13. ADD AUTOMATIC TRANSAXLE FLUID (for Automatic Transaxle)
14. INSPECT AND ADJUST AUTOMATIC TRANSAXLE FLUID (for Automatic Transaxle)
a. Inspect and adjust the automatic transaxle fluid.
15. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
a. Inspect and adjust the front wheel alignment.
16. CHECK ABS SPEED SENSOR SIGNAL
a. Check the ABS speed sensor signal.