xA L4-1.5L (1NZ-FE) (2006)
1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY
a. Install the hub and bearing assembly with the 4 bolts.
Torque: 61 Nm (622 kgf-cm, 45 ft. lbs.)
b. Connect the skid control sensor connector.
NOTICE: Do not twist the sensor wire when connecting it.
2. INSPECT REAR AXLE DEVIATION AND BACKLASH
a. Inspect the rear axle deviation and backlash.
3. INSTALL REAR BRAKE DRUM SUB-ASSEMBLY
4. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
5. CHECK ABS SPEED SENSOR SIGNAL
a. Check the ABS speed sensor signal.