xA L4-1.5L (1NZ-FE) (2006)
d. Remove the clip, and disconnect the cable end of the transmission control shift cable from the floor shift lever.
e. Using a screwdriver, detach the claw.
f.
Disconnect the transmission control shift cable from the shift lever retainer.
g. Remove the 2 clips and 2 washers, and disconnect the 2 cables from the manual transaxle.
h. Remove the 2 clips, and disconnect the 2 cables from the control cable bracket.
i.
Remove the 2 bolts and retainer from the floor.
j.
Remove the retainer from the grommet.
k. Remove the transmission control select cable from the grommet.
l.
Remove the bolt and clamp.