xA L4-1.5L (1NZ-FE) (2006)
8. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
a. Disconnect the connector of the wiper motor.
b. Remove the 2 bolts.
c. Slide the wiper link to the vehicle's passenger side. Remove the meshing of the rubber pin and remove the wiper motor and link.
9. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY
a. Using a screwdriver, remove the meshing of the 2 rods at the crank arm pivot of the wiper motor.
HINT: Tape the screwdriver tip before use.
b. Remove the 2 "torx" bolts and windshield wiper motor.
INSTALLATION
1. INSTALL WINDSHIELD WIPER MOTOR ASSEMBLY
a. Install the wiper motor to the wiper link with the 2 "torx" screws.