xB L4-1.5L (1NZ-FE) (2004)
/Page-396001.png)
Exhaust Pipe: Technical Service Bulletins
Exhaust System - Tailpipe Joint Clamp Installation
PRODUCT GENERAL INFORMATION
PG003-05
Title:
EXHAUST TAILPIPE JOINT CLAMP
INSTALLATION
Models:
Applicable Models
March 14, 2005
Introduction
The purpose of this bulletin is to provide additional details regarding the proper installation angle of an exhaust tailpipe joint clamp on applicable Toyota
vehicles.
Applicable Vehicles
^
2000 - 2005 model year ECHO vehicles.
^
2004 - 2005 model year Scion XA vehicles.
^
2004 - 2005 model year Scion xB vehicles.
Warranty Information
Installation Procedure
All Models:
Install exhaust tailpipe assembly.
1.
Install a new gasket into the exhaust center pipe.
2.
Install the new clamp positioning the bolt within the acceptable range" shown in the corresponding illustrations.
NOTE:
Do not reuse the removed gasket and clamp.
2000 - 2005 ECHO,
2004 - 2005 Scion XA & xB:
