xB L4-1.5L (1NZ-FE) (2004)
/Page-233020.png)
B.
Place the NEW cooler wiring No. 2 as shown in the illustration.
C.
Connect the connector.
6.
Install the air conditioning amplifier.
A.
Reinstall the air conditioning amplifier assembly removed in step 2.
B.
Connect the connector.
7.
Check operation.
A.
Install the instrument cluster finish panel sub-assembly.
B.
Remove the glove compartment door assembly.
C.
Reconnect the battery and then turn the ignition switch ON.
D.
Set up the following:
^
Fresh Mode
^
Blower Low