scion Workshop Repair Guides

Scion Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

Required SSTs

Calibration Procedure With Diagnostic Tester

Zero Point Calibration Procedure Using Diagnostic Tester

1.

Connect Diagnostic Tester to DLC3.

2.

Follow the flow below for the calibration procedure. If the vehicle is equipped with automatic transmission (A/T), ensure that the shift lever is in
the "P" range and the parking brake is applied. If the vehicle is equipped with manual transmission (M/T), ensure that the parking brake is applied.

Relays and Modules > Relays and Modules - Brakes and Traction Control > Traction Control Module > Component Information > Technical Service Bulletins > ABS/TCS - Zero Point Calibration Procedure > Page 35

< PREV PAGE NEXT PAGE >