scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

ABS/TCS - ABS/VSC Lamps ON/DTC C1231 Set|Page 3605 > < Diagram Information and Instructions|Page 3596
Page 1
background image

Wiring Harness: Customer Interest
ABS/TCS - ABS/VSC Lamps ON/DTC C1231 Set

BRAKES
BR005-04

Title:
VSC AND ABS LIGHTS ON WITH
DTC C1231

Models:
'04 Scion xB

June 14, 2004

Introduction

In the 2004 model year Scion xB vehicles with the V5 security system, you may experience Vehicle Skid Control (VSC) and Anti-lock Brake (ABS)
lights ON with DTC C1231. Inteference could be experienced when the steering column cover is reinstalled or when service work is performed, if the
security system is not installed correctly. During security system installation, make sure the V5 horn connector is positioned correctly. If DTC C1231
comes on, it will be necessary to replace the steering angle sensor and ensure the V5 horn connector is properly routed during reassembly following the
instructions provided in this TSB.

Applicable Vehicles

^

2004 model year Scion xB vehicles equipped with the V5 security system produced BEFORE the Production Change Effective VIN shown below.

Production Change Information

Parts Information

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

Repair Procedure

The VSC steering angle sensor is located below the steering wheel on the steering column.

1.

Remove the lower steering column cover.

ABS/TCS - ABS/VSC Lamps ON/DTC C1231 Set|Page 3605 > < Diagram Information and Instructions|Page 3596