xB L4-1.5L (1NZ-FE) (2004)
/Page-845001.png)
Clutch Switch: Testing and Inspection
CLUTCH START SWITCH ASSY (MTM)
ON-VEHICLE INSPECTION
1. CHECK CLUTCH START SYSTEM
a. Check that the engine does not start when the clutch pedal is released.
b. Check that the engine starts when the clutch pedal is fully depressed. If necessary, replace the clutch start switch assy.
INSPECTION
1. INSPECT CLUTCH START SWITCH ASSY
a. Check the continuity between the terminals when the switch is ON and OFF.
