xB L4-1.5L (1NZ-FE) (2004)
/Page-1031002.png)
3. REMOVE REAR AXLE LH HUB BOLT
a. Using SST and a screwdriver or an equivalent, remove the LH hub bolt.
SST 09628-10011
4. INSTALL REAR AXLE LH HUB BOLT
a. install the washer and the nut to a new LH hub bolt as shown in the illustration.
b. Using a screwdriver or an equivalent to hold the hub & bearing assy, install the LH hub bolt by tightening the nut.
5. INSTALL REAR BRAKE DRUM SUB-ASSY
6. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
