xB L4-2.4L (2AZ-FE) (2009)
5. INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY
(a) Pushing the front door outside handle assembly in the direction of the arrow mark shown in the illustration, install the front door outside handle
assembly.
6. INSTALL FRONT DOOR LOCK ASSEMBLY See: Locks/Power Locks/Power Door Lock Actuator/Service and Repair/Front Door
Lock/Installation
7. INSTALL FRONT DOOR OUTSIDE HANDLE COVER
(a) Using "TORX" socket wrench T30, install the cover.
Torque: 4.0 Nm (41 kgf-cm, 35 in-lbf)
(b) Install the hole plug.
8. INSTALL FRONT DOOR INSIDE PANEL REINFORCEMENT REAR EXTENSION
(a) Install the front door inside panel reinforcement rear extension with the 2 bolts.
Torque: 6.2 Nm (53 kgf-cm, 55 in-lbf)
9. INSTALL SEPARATION DOOR STIFFENER CUSHION
(a) Install the separation door stiffener cushion with the bolt.
Torque: 12 Nm (122 kgf-cm, 9 ft-lbf)