xB L4-2.4L (2AZ-FE) (2009)
Rear Door: Service and Repair
Reassembly
ENGINE HOOD / DOOR: REAR DOOR: REASSEMBLY
REASSEMBLY
1. INSTALL REAR DOOR OUTSIDE HANDLE FRAME SUB-ASSEMBLY
(a) Apply MP grease to the sliding areas of the rear door outside handle frame.
(b) Slide the rear door outside handle frame sub-assembly to install it.
2. INSTALL REAR DOOR OUTSIDE HANDLE FRONT PAD
(a) Engage the 2 claws and install the rear door outside handle front pad.
(b) Using "TORX" socket wrench T30, tighten the screw.
Torque: 4.0 Nm (41 kgf-cm, 35 in-lbf)
3. INSTALL REAR DOOR OUTSIDE HANDLE REAR PAD
(a) Engage the 2 claws and install the rear door outside handle rear pad.