xB L4-2.4L (2AZ-FE) (2009)
26. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH
(a) Using a clip remover, remove the clip.
(b) Disengage the 7 clips and remove the roof side inner garnish.
(c) Pass the rear seat outer belt through the slit in the roof side inner garnish.
27. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH
HINT: Use the same procedure as for the RH side.
28. REMOVE SEAT BELT ANCHOR COVER CAP
HINT: Use the same procedure for both sides.
(a) Pull portion A, shown in the illustration, toward you, remove the 2 claws on the lower side followed by the claw on the upper side. Then
remove the seat belt anchor cover cap.
29. REMOVE FRONT SEAT OUTER BELT ASSEMBLY RH
(a) Remove the bolt and through anchor.
30. REMOVE FRONT SEAT OUTER BELT ASSEMBLY LH
HINT: Use the same procedure as for the RH side.