scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Steering Angle Sensor, Traction Control > < Components|Page 3714
Page 3
background image

Motor/Installation

12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)

13. FILL RESERVOIR WITH BRAKE FLUID See: Brake Bleeding/Service and Repair
14. BLEED MASTER CYLINDER See: Brake Bleeding/Service and Repair
15. BLEED BRAKE LINE See: Brake Bleeding/Service and Repair
16. BLEED BRAKE ACTUATOR See: Brake Bleeding/Service and Repair
17. CHECK FLUID LEVEL IN RESERVOIR See: Brake Bleeding/Service and Repair
18. INSPECT FOR BRAKE FLUID LEAK
19. CHECK ACTUATOR WITH TECHSTREAM

 See: Testing and Inspection

20. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION

 See: Testing and Inspection/Component Tests and General Diagnostics/Calibration

21. CHECK AND CLEAR DTC

 See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes

Steering Angle Sensor, Traction Control > < Components|Page 3714