xB L4-2.4L (2AZ-FE) (2009)
Exhaust Pipe: Service and Repair
Removal
2AZ-FE EXHAUST: EXHAUST PIPE: REMOVAL
REMOVAL
1. REMOVE NO. 1 ENGINE UNDER COVER See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Removal
2. REMOVE HEATED OXYGEN SENSOR See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and
Repair/Heated Oxygen Sensor/Removal
3. REMOVE TAIL EXHAUST PIPE ASSEMBLY
(a) Remove the 2 bolts and No. 4 exhaust pipe support and remove the tail exhaust pipe assembly.
(b) Remove the exhaust pipe gasket.
4. REMOVE TAIL PIPE BAFFLE
(a) Using a plastic hammer, uniformly tap out and remove the exhaust tail pipe baffle.
5. REMOVE NO. 2 CENTER EXHAUST PIPE ASSEMBLY
(a) Remove the 2 bolts and 2 compression springs.
(b) Remove the No. 4 exhaust pipe support and remove the No. 2 center exhaust pipe assembly.
(c) Remove the exhaust pipe gasket.