xB L4-2.4L (2AZ-FE) (2009)
5. INSTALL TAIL PIPE BAFFLE
(a) Align the keyway on a new tail pipe baffle tall pipe baffle with the protruding part of the exhaust pipe tail as shown in the illustration.
(b) Using a plastic hammer, uniformly tap in the tail pipe baffle.
6. INSTALL TAIL EXHAUST PIPE ASSEMBLY
(a) Install a new exhaust pipe gasket onto the No. 2 exhaust pipe assembly.
(b) Install the tail exhaust pipe assembly with the 2 bolts and No. 4 exhaust pipe support.
7. INSTALL HEATED OXYGEN SENSOR See: Powertrain Management/Computers and Control Systems/Oxygen Sensor/Service and
Repair/Heated Oxygen Sensor/Installation
8. INSPECT FOR EXHAUST GAS LEAK
9. INSTALL NO. 1 ENGINE UNDER COVER See: Powertrain Management/Fuel Delivery and Air Induction/Throttle Body/Service and
Repair/Installation