xB L4-2.4L (2AZ-FE) (2009)
Fuel Gauge Sender: Service and Repair
Installation
2AZ-FE FUEL: FUEL SENDER GAUGE ASSEMBLY: INSTALLATION
INSTALLATION
1. INSTALL FUEL SENDER GAUGE ASSEMBLY
(a) Install the fuel sender gauge assembly by sliding it downward.
(b) Install the wire harness.
NOTICE: Do not damage the wire harness.
(c) Install the harness protector.
(d) Connect the fuel sender gauge connector.
2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY See: Powertrain Management/Fuel Delivery and Air
Induction/Fuel Pump/Service and Repair/Removal and Replacement/Installation
3. INSTALL FUEL PUMP GAUGE RETAINER See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and
Repair/Removal and Replacement/Installation
4. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service
and Repair/Removal and Replacement/Installation
5. INSTALL REAR FLOOR SERVICE HOLE COVER See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Pump/Service and
Repair/Removal and Replacement/Installation
6. INSPECT FOR FUEL LEAK
See: Powertrain Management/Fuel Delivery and Air Induction/Service Precautions/Fuel System
7. INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY See: Powertrain Management/Fuel Delivery and Air Induction/Fuel
Pump/Service and Repair/Removal and Replacement/Installation