xB L4-2.4L (2AZ-FE) (2009)
Tire Pressure Monitor Receiver / Transponder: Service and Repair
Installation
TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER: INSTALLATION
INSTALLATION
NOTICE: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system
before servicing See: Restraint Systems/Air Bag Systems/Service Precautions.
1. INSTALL TIRE PRESSURE WARNING RECEIVER ASSEMBLY
(a) Connect the pressure warning receiver connector.
(b) Install the tire pressure warning receiver with the nut.
Torque: 7.5 Nm (76 kgf-cm, 66 in-lbf)
2. INSTALL ROOF HEADLINING ASSEMBLY
HINT: See the steps from "INSTALL ROOF HEADLINING ASSEMBLY" through to "INSPECT SRS WARNING LIGHT" See: Body and
Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation.
3. INSPECT TIRE PRESSURE WARNING SYSTEM
HINT: See: Testing and Inspection/Initial Inspection and Diagnostic Overview/Test Mode Procedure