xB L4-2.4L (2AZ-FE) (2009)
Drive Belt: Service and Repair
Installation
2AZ-FE ENGINE MECHANICAL: DRIVE BELT: INSTALLATION
INSTALLATION
1. INSTALL FAN & GENERATOR V BELT
(a) Using SST and 19 mm socket wrench, loosen the V-ribbed belt tensioner arm clockwise, then install the fan and generator V belt.
SST: 09216-42010
09216-04010
NOTICE:
-
Be sure to connect SST and the tools so that they are in line during use.
-
When retracting the tensioner, turn it clockwise slowly for 3 seconds or more. Do not apply force rapidly.
-
After the tensioner is fully retracted, do not apply any more force than is necessary.
2. INSTALL REAR ENGINE UNDER COVER RH