xB L4-2.4L (2AZ-FE) (2009)
5. REMOVE FRONT AXLE HUB BOLT
(a) Temporarily install the 2 nuts and washers onto the front axle hub bolt as shown in the illustration.
(b) Using SST and a brass bar or an equivalent tool to hold the front axle, remove the front axle hub bolt.
SST: 09611-12010
6. INSTALL FRONT AXLE HUB BOLT
(a) Install a washer and nut to a new front axle hub bolt as shown in the illustration.
(b) Using a brass bar or an equivalent tool to hold the front axle, install the hub bolt by tightening the nut.
7. INSTALL FRONT DISC See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Front
Brake/Installation
8. INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY See: Wheel Hub/Service and Repair/Front Axle Hub/Installation
9. INSTALL FRONT FLEXIBLE HOSE See: Steering and Suspension/Suspension/Suspension Strut / Shock Absorber/Service and Repair/Front
Shock Absorber/Installation
10. INSTALL FRONT WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)