xB L4-2.4L (2AZ-FE) (2009)
/Page-809004.png)
(d) Remove the 2 bolts from the ECM.
(e) Remove the 4 screws and ECM bracket.
Installation
2AZ-FE ENGINE CONTROL SYSTEM: ECM: INSTALLATION
INSTALLATION
1. INSTALL ECM
(a) Install the bracket onto the ECM with the 4 screws.
(b) Install the ECM with the 2 bolts.
Torque: 8.0 Nm (82 kgf-cm, 71 in-lbf)
