xB L4-2.4L (2AZ-FE) (2009)
(a) Measure the resistance according to the value(s) in the table below.
HINT: The resistance must be measured after the C48 CAN center junction connector is disconnected.
Standard Resistance:
NG -- CHECK CAN BUS LINE FOR SHORT TO GND (STEERING SENSOR BRANCH WIRE)
OK -- Continue to next step.
11. CHECK CAN BUS LINE FOR SHORT TO GND (CAN CENTER J/C - AIR CONDITIONING AMPLIFIER)
(a) Measure the resistance according to the value(s) in the table below.
HINT: The resistance must be measured after the C48 CAN center junction connector is disconnected.