xB L4-2.4L (2AZ-FE) (2009)
/Page-819004.png)
3. ABS AND TRACTION ACTUATOR (SKID CONTROL ECU)
(a) Turn the ignition switch off.
(b) Disconnect the A37 ABS and traction actuator (skid control ECU) connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
4. STEERING SENSOR
(a) Turn the ignition switch off.
(b) Disconnect the C44 steering sensor connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance: