xB L4-2.4L (2AZ-FE) (2009)
/Page-819008.png)
10. COMBINATION METER ECU
(a) Turn the ignition switch off.
(b) Disconnect the C37 combination meter assembly connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
11. BUS BUFFER ECU
(a) Turn the ignition switch off.
(b) Disconnect the C26 bus buffer connector.
HINT: For vehicles without Accessory, take the connector out for inspection.
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
