xB L4-2.4L (2AZ-FE) (2009)
(b) Install the generator wire to terminal B with the nut.
Torque: 9.8 Nm (100 kgf-cm, 87 in-lbf)
(c) Attach the clamp and connect the generator connector to the generator.
(d) Install the 2 wire harness clamps.
3. INSTALL FAN & GENERATOR V BELT See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Service and Repair/Installation
4. INSTALL ENGINE UNDER COVER REAR RH
5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
6. INSPECT FOR OIL LEAK