xB L4-2.4L (2AZ-FE) (2009)
A. Remove the rear floor service hole cover.
B. Disconnect the connector from the fuel pump assembly.
NOTE
Step 41 is for replacing floor wire harness No.2 on the passenger side ONLY.
41. Remove the front seat assembly RH.
Refer to TIS applicable model year Scion xB Repair Manual:
2008 / 2009 / 2010 Scion xB:
Vehicle Interior - Seat - "Seat Front Seat Assembly: Removal"
42. Remove the shift lever knob sub-assembly
(for manual transaxle).
Turn the shift lever knob counterclockwise and remove the shift lever knob.
43. Remove the instrument cluster finish center lower panel.