xB L4-2.4L (2AZ-FE) (2009)
(d) Engage the wiring harness clamp.
(e) Engage the 2 wiring harness clamps.
(f) Connect the buckle switch connector.
(g) Engage the 2 claws and install the front seat cushion cover pad.
(h) Install the front seatback cover band.
3. INSTALL FRONT SEAT CUSHION SHIELD LH (for Driver Side) See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly/Reassembly
4. INSTALL RECLINING ADJUSTER KNOB (for Driver Side) See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Reassembly
5. INSTALL VERTICAL ADJUSTER COVER (for Driver Side) See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Reassembly
6. INSTALL RECLINING ADJUSTER RELEASE HANDLE (for Driver Side) See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly/Reassembly
7. INSTALL FRONT SEAT ASSEMBLY LH (for Driver Side) See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation
8. INSTALL FRONT SEAT ASSEMBLY RH (for Front Passenger Side) See: Body and Frame/Seats/Service and Repair/Front Seat
Assembly/Installation
9. INSTALL SEAT TRACK INNER BRACKET COVER See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation
10. INSTALL SEAT TRACK COVER See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation
11. INSTALL FRONT SEAT HEADREST ASSEMBLY
(a) Push in the lock button of the front seat headrest support and install the front seat headrest.
12. INSTALL SEAT TRACK COVER See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation
13. INSTALL SEAT TRACK INNER BRACKET COVER See: Body and Frame/Seats/Service and Repair/Front Seat Assembly/Installation
14. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
15. INSPECT SRS WARNING LIGHT
See: Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System