scion Workshop Repair Guides

Scion Workshop Service and Repair Manuals

Center Airbag Sensor Assembly|Page 876 > < Center Airbag Sensor Assembly|Page 874
Page 5
background image

-

Do not subject the rear airbag sensor to any impact or force.

(d) Confirm that there is no looseness by shaking the rear airbag sensor.

(e) Connect the airbag connector.

2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Installation

3. INSTALL REAR SEAT BACK HINGE SUB-ASSEMBLY
4. INSTALL REAR SEAT OUTER BELT ASSEMBLY RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Installation

5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Installation

6. INSTALL REAR DECK TRIM COVER See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and

Repair/Installation

8. INSTALL REAR DOOR SCUFF PLATE RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
9. INSTALL REAR SEATBACK ASSEMBLY RH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for RH Side)/Installation

10. INSTALL REAR SEATBACK ASSEMBLY LH See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly (for LH Side)/Installation
11. INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY See: Body and Frame/Seats/Service and Repair/Rear Seat Assembly

(for LH Side)/Installation

12. INSTALL DECK FLOOR BOX RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
13. INSTALL DECK FLOOR BOX LH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
14. INSTALL REAR DECK FLOOR BOX See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
15. INSTALL REAR FLOOR CARPET ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Installation
16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)

17. INSPECT SRS WARNING LIGHT

 See: Restraint Systems/Air Bag Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Diagnosis System

Center Airbag Sensor Assembly|Page 876 > < Center Airbag Sensor Assembly|Page 874