xB L4-2.4L (2AZ-FE) (2009)
Neutral Safety Switch: Service and Repair
Removal
U241E AUTOMATIC TRANSAXLE: PARK / NEUTRAL POSITION SWITCH: REMOVAL
REMOVAL
1. REMOVE BATTERY See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal and Replacement/Removal
2. REMOVE NO. 2 BATTERY CARRIER See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Removal
3. REMOVE PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Disconnect the connector from the park/neutral position switch assembly.
(b) Remove the nut and disconnect the transmission control cable assembly from the control shaft lever.
(c) Remove the nut and remove the control shaft lever.
(d) Using a screwdriver, pry off the lock plate.
(e) Using a screwdriver, pry out the lock plate. Then remove the manual valve shaft nut and lock plate.