xB L4-2.4L (2AZ-FE) (2009)
![background image](/scion/xb/l4-2.4l_(2az-fe)/Page-1515004.png)
(b) Disconnect the No. 3 parking brake cable assembly from the rear disc brake cylinder operation lever.
(c) Insert an offset wrench (14 mm) all the way into the clip of the No. 3 parking brake cable assembly as shown in the illustration to release the
clip claws and separate the No. 3 parking brake cable assembly from the rear disc brake cylinder assembly LH.
17. SEPARATE NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT: Perform the same procedure as for the No. 3 parking brake cable assembly.
18. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY LH See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Removal and Replacement/Rear Brake/Removal
19. REMOVE REAR DISC BRAKE CYLINDER ASSEMBLY RH
HINT: Perform the same procedure as for the LH side.
20. REMOVE REAR DISC BRAKE PAD
(a) Remove the 2 disc brake pads from the disc brake cylinder mounting LH See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Removal and Replacement/Rear Brake/Removal.
(b) Remove the 2 disc brake pads from the disc brake cylinder mounting RH.
HINT: Perform the same procedure as for the LH side.
21. REMOVE REAR DISC BRAKE CYLINDER MOUNTING LH See: Brakes and Traction Control/Disc Brake System/Service and
Repair/Removal and Replacement/Rear Brake/Removal
22. REMOVE REAR DISC BRAKE CYLINDER MOUNTING RH
HINT: Perform the same procedure as for the LH side.
23. REMOVE REAR DISC (for LH Side) See: Brakes and Traction Control/Disc Brake System/Service and Repair/Removal and Replacement/Rear
Brake/Removal
24. REMOVE REAR DISC (for RH Side)
HINT: Perform the same procedure as for the LH side.
25. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY LH See: Wheel Hub/Service and Repair/Rear Axle Hub/Removal
26. REMOVE REAR AXLE HUB AND BEARING ASSEMBLY RH
HINT: Perform the same procedure as for the LH side.