xB L4-2.4L (2AZ-FE) (2009)
Control Arm: Service and Repair
Installation
SUSPENSION: FRONT LOWER SUSPENSION ARM: INSTALLATION
INSTALLATION
1. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
(a) Position the front suspension crossmember on a level surface.
(b) Temporarily install the front lower No. 1 suspension arm sub-assembly RH onto the front suspension crossmember with the 2 bolts and nut.
NOTICE: Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut fixed.
2. TEMPORARILY INSTALL FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH (for Automatic Transaxle)
(a) Position the front suspension crossmember on a level surface.
(b) Temporarily install the front lower No. 1 suspension arm sub-assembly LH onto the front suspension crossmember with the 2 bolts and nut.
NOTICE: Because the nut has its own stopper, do not turn the nut. Tighten the bolt with the nut fixed.
3. INSTALL FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY (for Manual Transaxle)
(a) Support the front suspension crossmember with a transmission jack.
(b) While inserting SST into the reference holes on the front suspension crossmember RH and LH alternately, tighten 2 bolts A, 2 bolts B, and 2
nuts on the RH and LH sides to the respective specified torque in several steps.